VC-A50PN
IP PTZ Camera with NDI®
1080 60P NDI|HX PTZ camera with 20x optical zoom
- 1080p, 1080i and 720p HD settings
- Compatible with Newtek NDI workflows
- Ethernet, HDMI, and 3G-SDI triple video output
- Remote monitoring and control
- 20x optical zoom
- *NDI® is a registered trademark of Vizrt Group.
- key features
- Specification
Image Quality
Equipped with a professional 1/2.8 inch image sensor, Lumens VC-A50PN produces excellent video output. The camera excels in difficult lighting conditions thanks to WDR (wide dynamic range), 3D noise reduction, advanced auto-focus, auto-exposure, and auto-white balance algorithms. These enable the A50PN to maintain a consistent output even while the camera is in motion or when the zoom angle changes.
NDI Ready
Newtek’s NDI®|HX was developed to allow video and audio sources to be shared bi-directionally across an Ethernet network. By leveraging standard IT and network infrastructures, NDI® reduces the cost of installation while accelerating the time required to set up and connect devices. Once installed on the network, each device is instantly available as a video and audio source. Lumens’ 4K NDI PTZ camera is also available.
NDI Workgroups
NDI®|HX is widely supported by many video conferencing applications and video production platforms. By adopting NDI, Lumens VC-A50PN works seamlessly with systems such as Newtek Tricaster, vMix, OBS Broadcast, and Telestream Wirecast. Each system can ingest, monitor, control, switch, record, and stream multiple NDI® camera sources.
Installation and Power
Power is supplied through PoE+ (Power over Ethernet) or via a 12v DC input. Perfect for use in theaters, studios, conference rooms, and public meeting spaces, the VC-A50PN can be mounted to a floor stand, or suspended from the ceiling. The camera’s image flip mode instantly corrects the output when the camera is inverted.
Hitting the Right Angle
The robotic mechanism allows the camera to pan -170° to +170° and tilt from -30° to +90°. Camera movement is smooth, quiet, and precise, while the speed of movement can be varied by the operator using a hardware controller.
Camera Control
The camera’s settings and PTZ control functions can be managed via the IP, RS-232, and RS-422 ports. Supporting industry-standard NDI, VISCA, and PELCO-D protocols, the camera is compatible with a range of control hardware, making it easy to integrate the camera into your video and AV network.
Presets
For consistent results and faster operation, the camera stores up-to 128 presets. Activating a preset instantly applies user-defined settings for pan, tilt and zoom position, focus, exposure, and white balance. This allows the operator, for example, to automatically trigger a panning movement across a stage, a close-up focus on the presenter at the lectern, or a wide-angle shot.
Specs Details
Sensor
1/2.8″ 2.41MP CMOS
Video Format
1080p : 60 / 59.94 / 50 / 30 / 29.97 / 25
1080i : 60 / 59.94 / 50
720p : 60 / 59.94 / 50
Video Output Interface
3G-SDI / HDMI / Ethernet
Optical Zoom
20x
Horizontal Viewing Angle
Vertical Viewing Angle
32.1°
Diagonal Viewing Angle
65.4°
Panning Angle
+170° ~ -170°
Panning Speed
120°/sec
Tilting Angle
+90° ~ -30°
Tilting Speed
120°/sec
Aperture
F1.6~F3.8
Focal Length
5.33mm~110mm
Shutter Speed
1/1 ~ 1/10,000 sec
Minimum Object Distance
1.5m (Wide/Tele)
Video S/N Ratio
> 50dB
Minimum Illumination
1.0 lux (F1.6, 50IRE, 30fps)
Focus System
Auto / Manual
Gain Control
Auto / Manual
White Balance
Auto / Manual
Exposure Control
Auto / Manual
WDR
Yes
3D NR
Yes
Image Flip
Yes
Preset Positions
128
Multiple Video Stream
Two Streaming Structure
NDI 1080p 60fps + 640 x 360 30fps
Control Interface
RS-232 / RS-422 / Ethernet
Control Protocol
VISCA / PELCO D / NDI
Tally Light
Yes
PoE
PoE+ (IEEE802.3at)
Video Stream
NDI|HX
Video Compression
H.264
Audio Input
Line In / MIC In (Phone Jack 3.5mm x1)
Audio Output
Ethernet / SDI / HDMI
IR Pass-through
Yes
IR Receiver
Yes
IR Remote Control
Yes
Package Contents
Instruction for installation
Remote Control
Power Cord
Power Adapter
RS-422 Connector
Metal Plate A / B
M3 Screws
Dimensions (W x H x D)
6.9″ x 7.3″ x 7.3″
(174 x 186 x 187 mm)
Power Consumption
PoE: 17.5 W
DC In: 16 W
Weight
4.4 lbs (2 kg)
